agora::rtc::IRtcEngineEx Class Reference

#include <IAgoraRtcEngineEx.h>

Inherits agora::rtc::IRtcEngine.

Inherited by agora::rtc::IRtcEngineInternal.

Public Member Functions
virtual int	joinChannelEx (const char *token, const RtcConnection &connection, const ChannelMediaOptions &options, IRtcEngineEventHandler *eventHandler)=0
virtual int	leaveChannelEx (const RtcConnection &connection)=0
virtual int	leaveChannelEx (const RtcConnection &connection, const LeaveChannelOptions &options)=0
virtual int	leaveChannelWithUserAccountEx (const char *channelId, const char *userAccount)=0
virtual int	leaveChannelWithUserAccountEx (const char *channelId, const char *userAccount, const LeaveChannelOptions &options)=0
virtual int	updateChannelMediaOptionsEx (const ChannelMediaOptions &options, const RtcConnection &connection)=0
virtual int	setVideoEncoderConfigurationEx (const VideoEncoderConfiguration &config, const RtcConnection &connection)=0
virtual int	setupRemoteVideoEx (const VideoCanvas &canvas, const RtcConnection &connection)=0
virtual int	muteRemoteAudioStreamEx (uid_t uid, bool mute, const RtcConnection &connection)=0
virtual int	muteRemoteVideoStreamEx (uid_t uid, bool mute, const RtcConnection &connection)=0
virtual int	setRemoteVideoStreamTypeEx (uid_t uid, VIDEO_STREAM_TYPE streamType, const RtcConnection &connection)=0
virtual int	muteLocalAudioStreamEx (bool mute, const RtcConnection &connection)=0
virtual int	muteLocalVideoStreamEx (bool mute, const RtcConnection &connection)=0
virtual int	muteAllRemoteAudioStreamsEx (bool mute, const RtcConnection &connection)=0
virtual int	muteAllRemoteVideoStreamsEx (bool mute, const RtcConnection &connection)=0
virtual int	setSubscribeAudioBlocklistEx (uid_t *uidList, int uidNumber, const RtcConnection &connection)=0
virtual int	setSubscribeAudioAllowlistEx (uid_t *uidList, int uidNumber, const RtcConnection &connection)=0
virtual int	setSubscribeVideoBlocklistEx (uid_t *uidList, int uidNumber, const RtcConnection &connection)=0
virtual int	setSubscribeVideoAllowlistEx (uid_t *uidList, int uidNumber, const RtcConnection &connection)=0
virtual int	setRemoteVideoSubscriptionOptionsEx (uid_t uid, const VideoSubscriptionOptions &options, const RtcConnection &connection)=0
virtual int	setRemoteVoicePositionEx (uid_t uid, double pan, double gain, const RtcConnection &connection)=0
virtual int	setRemoteUserSpatialAudioParamsEx (uid_t uid, const agora::SpatialAudioParams &params, const RtcConnection &connection)=0
virtual int	setRemoteRenderModeEx (uid_t uid, media::base::RENDER_MODE_TYPE renderMode, VIDEO_MIRROR_MODE_TYPE mirrorMode, const RtcConnection &connection)=0
virtual int	enableLoopbackRecordingEx (const RtcConnection &connection, bool enabled, const char *deviceName=NULL)=0
virtual int	adjustRecordingSignalVolumeEx (int volume, const RtcConnection &connection)=0
virtual int	muteRecordingSignalEx (bool mute, const RtcConnection &connection)=0
virtual int	adjustUserPlaybackSignalVolumeEx (uid_t uid, int volume, const RtcConnection &connection)=0
virtual CONNECTION_STATE_TYPE	getConnectionStateEx (const RtcConnection &connection)=0
virtual int	enableEncryptionEx (const RtcConnection &connection, bool enabled, const EncryptionConfig &config)=0
virtual int	createDataStreamEx (int *streamId, bool reliable, bool ordered, const RtcConnection &connection)=0
virtual int	createDataStreamEx (int *streamId, const DataStreamConfig &config, const RtcConnection &connection)=0
virtual int	sendStreamMessageEx (int streamId, const char *data, size_t length, const RtcConnection &connection)=0
virtual int	sendRdtMessageEx (uid_t uid, RdtStreamType type, const char *data, size_t length, const RtcConnection &connection)=0
virtual int	sendMediaControlMessageEx (uid_t uid, const char *data, size_t length, const RtcConnection &connection)=0
virtual int	addVideoWatermarkEx (const char *watermarkUrl, const WatermarkOptions &options, const RtcConnection &connection)=0
virtual int	addVideoWatermarkEx (const WatermarkConfig &config, const RtcConnection &connection)=0
virtual int	removeVideoWatermarkEx (const char *id, const RtcConnection &connection)=0
virtual int	clearVideoWatermarkEx (const RtcConnection &connection)=0
virtual int	sendCustomReportMessageEx (const char *id, const char *category, const char *event, const char *label, int value, const RtcConnection &connection)=0
virtual int	enableAudioVolumeIndicationEx (int interval, int smooth, bool reportVad, const RtcConnection &connection)=0
virtual int	startRtmpStreamWithoutTranscodingEx (const char *url, const RtcConnection &connection)=0
virtual int	startRtmpStreamWithTranscodingEx (const char *url, const LiveTranscoding &transcoding, const RtcConnection &connection)=0
virtual int	updateRtmpTranscodingEx (const LiveTranscoding &transcoding, const RtcConnection &connection)=0
virtual int	stopRtmpStreamEx (const char *url, const RtcConnection &connection)=0
virtual int	startOrUpdateChannelMediaRelayEx (const ChannelMediaRelayConfiguration &configuration, const RtcConnection &connection)=0
virtual int	stopChannelMediaRelayEx (const RtcConnection &connection)=0
virtual int	pauseAllChannelMediaRelayEx (const RtcConnection &connection)=0
virtual int	resumeAllChannelMediaRelayEx (const RtcConnection &connection)=0
virtual int	getUserInfoByUserAccountEx (const char *userAccount, rtc::UserInfo *userInfo, const RtcConnection &connection)=0
virtual int	getUserInfoByUidEx (uid_t uid, rtc::UserInfo *userInfo, const RtcConnection &connection)=0
virtual int	enableDualStreamModeEx (bool enabled, const SimulcastStreamConfig &streamConfig, const RtcConnection &connection)=0
virtual int	setDualStreamModeEx (SIMULCAST_STREAM_MODE mode, const SimulcastStreamConfig &streamConfig, const RtcConnection &connection)=0
virtual int	setSimulcastConfigEx (const SimulcastConfig &simulcastConfig, const RtcConnection &connection)=0
virtual int	setHighPriorityUserListEx (uid_t *uidList, int uidNum, STREAM_FALLBACK_OPTIONS option, const RtcConnection &connection)=0
virtual int	takeSnapshotEx (const RtcConnection &connection, uid_t uid, const char *filePath)=0
virtual int	takeSnapshotEx (const RtcConnection &connection, uid_t uid, const media::SnapshotConfig &config)=0
virtual int	enableContentInspectEx (bool enabled, const media::ContentInspectConfig &config, const RtcConnection &connection)=0
virtual int	startMediaRenderingTracingEx (const RtcConnection &connection)=0
virtual int	setParametersEx (const RtcConnection &connection, const char *parameters)=0
virtual int	getCallIdEx (agora::util::AString &callId, const RtcConnection &connection)=0
virtual int	sendAudioMetadataEx (const RtcConnection &connection, const char *metadata, size_t length)=0
virtual int	preloadEffectEx (const RtcConnection &connection, int soundId, const char *filePath, int startPos=0)=0
virtual int	playEffectEx (const RtcConnection &connection, int soundId, const char *filePath, int loopCount, double pitch, double pan, int gain, bool publish=false, int startPos=0)=0
Public Member Functions inherited from agora::rtc::IRtcEngine
virtual int	initialize (const RtcEngineContext &context)=0
virtual int	queryInterface (INTERFACE_ID_TYPE iid, void **inter)=0
virtual const char *	getVersion (int *build)=0
virtual const char *	getErrorDescription (int code)=0
virtual int	queryCodecCapability (CodecCapInfo *codecInfo, int &size)=0
virtual int	queryDeviceScore ()=0
virtual int	preloadChannel (const char *token, const char *channelId, uid_t uid)=0
virtual int	preloadChannelWithUserAccount (const char *token, const char *channelId, const char *userAccount)=0
virtual int	updatePreloadChannelToken (const char *token)=0
virtual int	joinChannel (const char *token, const char *channelId, const char *info, uid_t uid)=0
virtual int	joinChannel (const char *token, const char *channelId, uid_t uid, const ChannelMediaOptions &options)=0
virtual int	updateChannelMediaOptions (const ChannelMediaOptions &options)=0
virtual int	leaveChannel ()=0
virtual int	leaveChannel (const LeaveChannelOptions &options)=0
virtual int	renewToken (const char *token)=0
virtual int	setChannelProfile (CHANNEL_PROFILE_TYPE profile)=0
virtual int	setClientRole (CLIENT_ROLE_TYPE role)=0
virtual int	setClientRole (CLIENT_ROLE_TYPE role, const ClientRoleOptions &options)=0
virtual int	startEchoTest (const EchoTestConfiguration &config)=0
virtual int	stopEchoTest ()=0
virtual int	enableMultiCamera (bool enabled, const CameraCapturerConfiguration &config)=0
virtual int	enableVideo ()=0
virtual int	disableVideo ()=0
virtual int	startPreview ()=0
virtual int	startPreview (VIDEO_SOURCE_TYPE sourceType)=0
virtual int	stopPreview ()=0
virtual int	stopPreview (VIDEO_SOURCE_TYPE sourceType)=0
virtual int	startLastmileProbeTest (const LastmileProbeConfig &config)=0
virtual int	stopLastmileProbeTest ()=0
virtual int	setVideoEncoderConfiguration (const VideoEncoderConfiguration &config)=0
virtual int	setBeautyEffectOptions (bool enabled, const BeautyOptions &options, agora::media::MEDIA_SOURCE_TYPE type=agora::media::PRIMARY_CAMERA_SOURCE)=0
virtual int	setFaceShapeBeautyOptions (bool enabled, const FaceShapeBeautyOptions &options, agora::media::MEDIA_SOURCE_TYPE type=agora::media::PRIMARY_CAMERA_SOURCE)=0
virtual int	setFaceShapeAreaOptions (const FaceShapeAreaOptions &options, agora::media::MEDIA_SOURCE_TYPE type=agora::media::PRIMARY_CAMERA_SOURCE)=0
virtual int	getFaceShapeBeautyOptions (FaceShapeBeautyOptions &options, agora::media::MEDIA_SOURCE_TYPE type=agora::media::PRIMARY_CAMERA_SOURCE)=0
virtual int	getFaceShapeAreaOptions (agora::rtc::FaceShapeAreaOptions::FACE_SHAPE_AREA shapeArea, FaceShapeAreaOptions &options, agora::media::MEDIA_SOURCE_TYPE type=agora::media::PRIMARY_CAMERA_SOURCE)=0
virtual int	setFilterEffectOptions (bool enabled, const FilterEffectOptions &options, agora::media::MEDIA_SOURCE_TYPE type=agora::media::PRIMARY_CAMERA_SOURCE)=0
virtual agora_refptr< IVideoEffectObject >	createVideoEffectObject (const char *bundlePath, agora::media::MEDIA_SOURCE_TYPE type=agora::media::PRIMARY_CAMERA_SOURCE)=0
virtual int	destroyVideoEffectObject (agora_refptr< IVideoEffectObject > videoEffectObject)=0
virtual int	setLowlightEnhanceOptions (bool enabled, const LowlightEnhanceOptions &options, agora::media::MEDIA_SOURCE_TYPE type=agora::media::PRIMARY_CAMERA_SOURCE)=0
virtual int	setVideoDenoiserOptions (bool enabled, const VideoDenoiserOptions &options, agora::media::MEDIA_SOURCE_TYPE type=agora::media::PRIMARY_CAMERA_SOURCE)=0
virtual int	setColorEnhanceOptions (bool enabled, const ColorEnhanceOptions &options, agora::media::MEDIA_SOURCE_TYPE type=agora::media::PRIMARY_CAMERA_SOURCE)=0
virtual int	enableVirtualBackground (bool enabled, VirtualBackgroundSource backgroundSource, SegmentationProperty segproperty, agora::media::MEDIA_SOURCE_TYPE type=agora::media::PRIMARY_CAMERA_SOURCE)=0
virtual int	setupRemoteVideo (const VideoCanvas &canvas)=0
virtual int	setupLocalVideo (const VideoCanvas &canvas)=0
virtual int	setVideoScenario (VIDEO_APPLICATION_SCENARIO_TYPE scenarioType)=0
virtual int	setVideoQoEPreference (VIDEO_QOE_PREFERENCE_TYPE qoePreference)=0
virtual int	enableAudio ()=0
virtual int	disableAudio ()=0
virtual int	setAudioProfile (AUDIO_PROFILE_TYPE profile, AUDIO_SCENARIO_TYPE scenario) __deprecated=0
virtual int	setAudioProfile (AUDIO_PROFILE_TYPE profile)=0
virtual int	setAudioScenario (AUDIO_SCENARIO_TYPE scenario)=0
virtual int	enableLocalAudio (bool enabled)=0
virtual int	muteLocalAudioStream (bool mute)=0
virtual int	muteAllRemoteAudioStreams (bool mute)=0
virtual int	muteRemoteAudioStream (uid_t uid, bool mute)=0
virtual int	muteLocalVideoStream (bool mute)=0
virtual int	enableLocalVideo (bool enabled)=0
virtual int	muteAllRemoteVideoStreams (bool mute)=0
virtual int	setRemoteDefaultVideoStreamType (VIDEO_STREAM_TYPE streamType)=0
virtual int	muteRemoteVideoStream (uid_t uid, bool mute)=0
virtual int	setRemoteVideoStreamType (uid_t uid, VIDEO_STREAM_TYPE streamType)=0
virtual int	setRemoteVideoSubscriptionOptions (uid_t uid, const VideoSubscriptionOptions &options)=0
virtual int	setSubscribeAudioBlocklist (uid_t *uidList, int uidNumber)=0
virtual int	setSubscribeAudioAllowlist (uid_t *uidList, int uidNumber)=0
virtual int	setSubscribeVideoBlocklist (uid_t *uidList, int uidNumber)=0
virtual int	setSubscribeVideoAllowlist (uid_t *uidList, int uidNumber)=0
virtual int	enableAudioVolumeIndication (int interval, int smooth, bool reportVad)=0
virtual int	startAudioRecording (const char *filePath, AUDIO_RECORDING_QUALITY_TYPE quality)=0
virtual int	startAudioRecording (const char *filePath, int sampleRate, AUDIO_RECORDING_QUALITY_TYPE quality)=0
virtual int	startAudioRecording (const AudioRecordingConfiguration &config)=0
virtual int	registerAudioEncodedFrameObserver (const AudioEncodedFrameObserverConfig &config, IAudioEncodedFrameObserver *observer)=0
virtual int	stopAudioRecording ()=0
virtual agora_refptr< IMediaPlayer >	createMediaPlayer ()=0
virtual int	destroyMediaPlayer (agora_refptr< IMediaPlayer > media_player)=0
virtual agora_refptr< IMediaRecorder >	createMediaRecorder (const RecorderStreamInfo &info)=0
virtual int	destroyMediaRecorder (agora_refptr< IMediaRecorder > mediaRecorder)=0
virtual int	startAudioMixing (const char *filePath, bool loopback, int cycle)=0
virtual int	startAudioMixing (const char *filePath, bool loopback, int cycle, int startPos)=0
virtual int	stopAudioMixing ()=0
virtual int	pauseAudioMixing ()=0
virtual int	resumeAudioMixing ()=0
virtual int	selectAudioTrack (int index)=0
virtual int	getAudioTrackCount ()=0
virtual int	adjustAudioMixingVolume (int volume)=0
virtual int	adjustAudioMixingPublishVolume (int volume)=0
virtual int	getAudioMixingPublishVolume ()=0
virtual int	adjustAudioMixingPlayoutVolume (int volume)=0
virtual int	getAudioMixingPlayoutVolume ()=0
virtual int	getAudioMixingDuration ()=0
virtual int	getAudioMixingCurrentPosition ()=0
virtual int	setAudioMixingPosition (int pos)=0
virtual int	setAudioMixingDualMonoMode (media::AUDIO_MIXING_DUAL_MONO_MODE mode)=0
virtual int	setAudioMixingPitch (int pitch)=0
virtual int	setAudioMixingPlaybackSpeed (int speed)=0
virtual int	getEffectsVolume ()=0
virtual int	setEffectsVolume (int volume)=0
virtual int	preloadEffect (int soundId, const char *filePath, int startPos=0)=0
virtual int	playEffect (int soundId, const char *filePath, int loopCount, double pitch, double pan, int gain, bool publish=false, int startPos=0)=0
virtual int	playAllEffects (int loopCount, double pitch, double pan, int gain, bool publish=false)=0
virtual int	getVolumeOfEffect (int soundId)=0
virtual int	setVolumeOfEffect (int soundId, int volume)=0
virtual int	pauseEffect (int soundId)=0
virtual int	pauseAllEffects ()=0
virtual int	resumeEffect (int soundId)=0
virtual int	resumeAllEffects ()=0
virtual int	stopEffect (int soundId)=0
virtual int	stopAllEffects ()=0
virtual int	unloadEffect (int soundId)=0
virtual int	unloadAllEffects ()=0
virtual int	getEffectDuration (const char *filePath)=0
virtual int	setEffectPosition (int soundId, int pos)=0
virtual int	getEffectCurrentPosition (int soundId)=0
virtual int	enableSoundPositionIndication (bool enabled)=0
virtual int	setRemoteVoicePosition (uid_t uid, double pan, double gain)=0
virtual int	enableSpatialAudio (bool enabled)=0
virtual int	setRemoteUserSpatialAudioParams (uid_t uid, const agora::SpatialAudioParams &params)=0
virtual int	setVoiceBeautifierPreset (VOICE_BEAUTIFIER_PRESET preset)=0
virtual int	setAudioEffectPreset (AUDIO_EFFECT_PRESET preset)=0
virtual int	setVoiceConversionPreset (VOICE_CONVERSION_PRESET preset)=0
virtual int	setAudioEffectParameters (AUDIO_EFFECT_PRESET preset, int param1, int param2)=0
virtual int	setVoiceBeautifierParameters (VOICE_BEAUTIFIER_PRESET preset, int param1, int param2)=0
virtual int	setVoiceConversionParameters (VOICE_CONVERSION_PRESET preset, int param1, int param2)=0
virtual int	setLocalVoicePitch (double pitch)=0
virtual int	setLocalVoiceFormant (double formantRatio)=0
virtual int	setLocalVoiceEqualization (AUDIO_EQUALIZATION_BAND_FREQUENCY bandFrequency, int bandGain)=0
virtual int	setLocalVoiceReverb (AUDIO_REVERB_TYPE reverbKey, int value)=0
virtual int	setHeadphoneEQPreset (HEADPHONE_EQUALIZER_PRESET preset)=0
virtual int	setHeadphoneEQParameters (int lowGain, int highGain)=0
virtual int	enableVoiceAITuner (bool enabled, VOICE_AI_TUNER_TYPE type)=0
virtual int	setLogFile (const char *filePath)=0
virtual int	setLogFilter (unsigned int filter)=0
virtual int	setLogLevel (commons::LOG_LEVEL level)=0
virtual int	setLogFileSize (unsigned int fileSizeInKBytes)=0
virtual int	uploadLogFile (agora::util::AString &requestId)=0
virtual int	writeLog (commons::LOG_LEVEL level, const char *fmt,...)=0
virtual int	setLocalRenderMode (media::base::RENDER_MODE_TYPE renderMode, VIDEO_MIRROR_MODE_TYPE mirrorMode)=0
virtual int	setRemoteRenderMode (uid_t uid, media::base::RENDER_MODE_TYPE renderMode, VIDEO_MIRROR_MODE_TYPE mirrorMode)=0
virtual int	setLocalRenderTargetFps (VIDEO_SOURCE_TYPE sourceType, int targetFps)=0
virtual int	setRemoteRenderTargetFps (int targetFps)=0
virtual int	setLocalRenderMode (media::base::RENDER_MODE_TYPE renderMode) __deprecated=0
virtual int	setLocalVideoMirrorMode (VIDEO_MIRROR_MODE_TYPE mirrorMode) __deprecated=0
virtual int	enableDualStreamMode (bool enabled) __deprecated=0
virtual int	enableDualStreamMode (bool enabled, const SimulcastStreamConfig &streamConfig) __deprecated=0
virtual int	setDualStreamMode (SIMULCAST_STREAM_MODE mode)=0
virtual int	setSimulcastConfig (const SimulcastConfig &simulcastConfig)=0
virtual int	setDualStreamMode (SIMULCAST_STREAM_MODE mode, const SimulcastStreamConfig &streamConfig)=0
virtual int	enableCustomAudioLocalPlayback (track_id_t trackId, bool enabled)=0
virtual int	setRecordingAudioFrameParameters (int sampleRate, int channel, RAW_AUDIO_FRAME_OP_MODE_TYPE mode, int samplesPerCall)=0
virtual int	setPlaybackAudioFrameParameters (int sampleRate, int channel, RAW_AUDIO_FRAME_OP_MODE_TYPE mode, int samplesPerCall)=0
virtual int	setMixedAudioFrameParameters (int sampleRate, int channel, int samplesPerCall)=0
virtual int	setEarMonitoringAudioFrameParameters (int sampleRate, int channel, RAW_AUDIO_FRAME_OP_MODE_TYPE mode, int samplesPerCall)=0
virtual int	setPlaybackAudioFrameBeforeMixingParameters (int sampleRate, int channel)=0
virtual int	setPlaybackAudioFrameBeforeMixingParameters (int sampleRate, int channel, int samplesPerCall)=0
virtual int	enableAudioSpectrumMonitor (int intervalInMS=100)=0
virtual int	disableAudioSpectrumMonitor ()=0
virtual int	registerAudioSpectrumObserver (agora::media::IAudioSpectrumObserver *observer)=0
virtual int	unregisterAudioSpectrumObserver (agora::media::IAudioSpectrumObserver *observer)=0
virtual int	adjustRecordingSignalVolume (int volume)=0
virtual int	muteRecordingSignal (bool mute)=0
virtual int	adjustPlaybackSignalVolume (int volume)=0
virtual int	adjustUserPlaybackSignalVolume (uid_t uid, int volume)=0
virtual int	setRemoteSubscribeFallbackOption (STREAM_FALLBACK_OPTIONS option)=0
virtual int	setHighPriorityUserList (uid_t *uidList, int uidNum, STREAM_FALLBACK_OPTIONS option)=0
virtual int	enableExtension (const char *provider, const char *extension, const ExtensionInfo &extensionInfo, bool enable=true)=0
virtual int	setExtensionProperty (const char *provider, const char *extension, const ExtensionInfo &extensionInfo, const char *key, const char *value)=0
virtual int	getExtensionProperty (const char *provider, const char *extension, const ExtensionInfo &extensionInfo, const char *key, char *value, int buf_len)=0
virtual int	enableLoopbackRecording (bool enabled, const char *deviceName=NULL)=0
virtual int	adjustLoopbackSignalVolume (int volume)=0
virtual int	getLoopbackRecordingVolume ()=0
virtual int	enableInEarMonitoring (bool enabled, int includeAudioFilters)=0
virtual int	setInEarMonitoringVolume (int volume)=0
virtual int	loadExtensionProvider (const char *path, bool unload_after_use=false)=0
virtual int	setExtensionProviderProperty (const char *provider, const char *key, const char *value)=0
virtual int	registerExtension (const char *provider, const char *extension, agora::media::MEDIA_SOURCE_TYPE type=agora::media::UNKNOWN_MEDIA_SOURCE)=0
virtual int	enableExtension (const char *provider, const char *extension, bool enable=true, agora::media::MEDIA_SOURCE_TYPE type=agora::media::UNKNOWN_MEDIA_SOURCE)=0
virtual int	setExtensionProperty (const char *provider, const char *extension, const char *key, const char *value, agora::media::MEDIA_SOURCE_TYPE type=agora::media::UNKNOWN_MEDIA_SOURCE)=0
virtual int	getExtensionProperty (const char *provider, const char *extension, const char *key, char *value, int buf_len, agora::media::MEDIA_SOURCE_TYPE type=agora::media::UNKNOWN_MEDIA_SOURCE)=0
virtual int	setCameraCapturerConfiguration (const CameraCapturerConfiguration &config)=0
virtual video_track_id_t	createCustomVideoTrack ()=0
virtual video_track_id_t	createCustomEncodedVideoTrack (const SenderOptions &sender_option)=0
virtual int	destroyCustomVideoTrack (video_track_id_t video_track_id)=0
virtual int	destroyCustomEncodedVideoTrack (video_track_id_t video_track_id)=0
virtual int	switchCamera ()=0
virtual bool	isCameraZoomSupported ()=0
virtual bool	isCameraFaceDetectSupported ()=0
virtual bool	isCameraTorchSupported ()=0
virtual bool	isCameraFocusSupported ()=0
virtual bool	isCameraAutoFocusFaceModeSupported ()=0
virtual int	setCameraZoomFactor (float factor)=0
virtual int	enableFaceDetection (bool enabled)=0
virtual float	getCameraMaxZoomFactor ()=0
virtual int	setCameraFocusPositionInPreview (float positionX, float positionY)=0
virtual int	setCameraTorchOn (bool isOn)=0
virtual int	setCameraAutoFocusFaceModeEnabled (bool enabled)=0
virtual bool	isCameraExposurePositionSupported ()=0
virtual int	setCameraExposurePosition (float positionXinView, float positionYinView)=0
virtual bool	isCameraExposureSupported ()=0
virtual int	setCameraExposureFactor (float factor)=0
virtual bool	isCameraAutoExposureFaceModeSupported ()=0
virtual int	setCameraAutoExposureFaceModeEnabled (bool enabled)=0
virtual int	setCameraStabilizationMode (CAMERA_STABILIZATION_MODE mode)=0
virtual int	setDefaultAudioRouteToSpeakerphone (bool defaultToSpeaker)=0
virtual int	setEnableSpeakerphone (bool speakerOn)=0
virtual bool	isSpeakerphoneEnabled ()=0
virtual int	setRouteInCommunicationMode (int route)=0
virtual bool	isCameraCenterStageSupported ()=0
virtual int	enableCameraCenterStage (bool enabled)=0
virtual IScreenCaptureSourceList *	getScreenCaptureSources (const SIZE &thumbSize, const SIZE &iconSize, const bool includeScreen)=0
virtual int	setAudioSessionOperationRestriction (AUDIO_SESSION_OPERATION_RESTRICTION restriction)=0
virtual int	startScreenCaptureByDisplayId (int64_t displayId, const Rectangle &regionRect, const ScreenCaptureParameters &captureParams)=0
virtual int	startScreenCaptureByScreenRect (const Rectangle &screenRect, const Rectangle &regionRect, const ScreenCaptureParameters &captureParams) __deprecated=0
virtual int	getAudioDeviceInfo (DeviceInfo &deviceInfo)=0
virtual int	startScreenCaptureByWindowId (int64_t windowId, const Rectangle &regionRect, const ScreenCaptureParameters &captureParams)=0
virtual int	setScreenCaptureContentHint (VIDEO_CONTENT_HINT contentHint)=0
virtual int	updateScreenCaptureRegion (const Rectangle &regionRect)=0
virtual int	updateScreenCaptureParameters (const ScreenCaptureParameters &captureParams)=0
virtual int	startScreenCapture (const ScreenCaptureParameters2 &captureParams)=0
virtual int	updateScreenCapture (const ScreenCaptureParameters2 &captureParams)=0
virtual int	queryScreenCaptureCapability ()=0
virtual int	queryCameraFocalLengthCapability (agora::rtc::FocalLengthInfo *focalLengthInfos, int &size)=0
virtual int	setExternalMediaProjection (void *mediaProjection)=0
virtual int	setScreenCaptureScenario (SCREEN_SCENARIO_TYPE screenScenario)=0
virtual int	stopScreenCapture ()=0
virtual int	getCallId (agora::util::AString &callId)=0
virtual int	rate (const char *callId, int rating, const char *description)=0
virtual int	complain (const char *callId, const char *description)=0
virtual int	startRtmpStreamWithoutTranscoding (const char *url)=0
virtual int	startRtmpStreamWithTranscoding (const char *url, const LiveTranscoding &transcoding)=0
virtual int	updateRtmpTranscoding (const LiveTranscoding &transcoding)=0
virtual int	startLocalVideoTranscoder (const LocalTranscoderConfiguration &config)=0
virtual int	updateLocalTranscoderConfiguration (const LocalTranscoderConfiguration &config)=0
virtual int	stopRtmpStream (const char *url)=0
virtual int	stopLocalVideoTranscoder ()=0
virtual int	startLocalAudioMixer (const LocalAudioMixerConfiguration &config)=0
virtual int	updateLocalAudioMixerConfiguration (const LocalAudioMixerConfiguration &config)=0
virtual int	stopLocalAudioMixer ()=0
virtual int	startCameraCapture (VIDEO_SOURCE_TYPE sourceType, const CameraCapturerConfiguration &config)=0
virtual int	stopCameraCapture (VIDEO_SOURCE_TYPE sourceType)=0
virtual int	setCameraDeviceOrientation (VIDEO_SOURCE_TYPE type, VIDEO_ORIENTATION orientation)=0
virtual int	setScreenCaptureOrientation (VIDEO_SOURCE_TYPE type, VIDEO_ORIENTATION orientation)=0
virtual int	startScreenCapture (VIDEO_SOURCE_TYPE sourceType, const ScreenCaptureConfiguration &config)=0
virtual int	stopScreenCapture (VIDEO_SOURCE_TYPE sourceType)=0
virtual CONNECTION_STATE_TYPE	getConnectionState ()=0
virtual bool	registerEventHandler (IRtcEngineEventHandler *eventHandler)=0
virtual bool	unregisterEventHandler (IRtcEngineEventHandler *eventHandler)=0
virtual int	setRemoteUserPriority (uid_t uid, PRIORITY_TYPE userPriority)=0
virtual int	registerPacketObserver (IPacketObserver *observer)=0
virtual int	enableEncryption (bool enabled, const EncryptionConfig &config)=0
virtual int	createDataStream (int *streamId, bool reliable, bool ordered)=0
virtual int	createDataStream (int *streamId, const DataStreamConfig &config)=0
virtual int	sendStreamMessage (int streamId, const char *data, size_t length)=0
virtual int	sendRdtMessage (uid_t uid, RdtStreamType type, const char *data, size_t length)=0
virtual int	sendMediaControlMessage (uid_t uid, const char *data, size_t length)=0
virtual int	addVideoWatermark (const RtcImage &watermark) __deprecated=0
virtual int	addVideoWatermark (const char *watermarkUrl, const WatermarkOptions &options)=0
virtual int	addVideoWatermark (const WatermarkConfig &configs)=0
virtual int	removeVideoWatermark (const char *id)=0
virtual int	clearVideoWatermarks ()=0
virtual int	pauseAudio () __deprecated=0
virtual int	resumeAudio () __deprecated=0
virtual int	enableWebSdkInteroperability (bool enabled) __deprecated=0
virtual int	sendCustomReportMessage (const char *id, const char *category, const char *event, const char *label, int value)=0
virtual int	registerMediaMetadataObserver (IMetadataObserver *observer, IMetadataObserver::METADATA_TYPE type)=0
virtual int	unregisterMediaMetadataObserver (IMetadataObserver *observer, IMetadataObserver::METADATA_TYPE type)=0
virtual int	startAudioFrameDump (const char *channel_id, uid_t uid, const char *location, const char *uuid, const char *passwd, long duration_ms, bool auto_upload)=0
virtual int	stopAudioFrameDump (const char *channel_id, uid_t uid, const char *location)=0
virtual int	setAINSMode (bool enabled, AUDIO_AINS_MODE mode)=0
virtual int	registerLocalUserAccount (const char *appId, const char *userAccount)=0
virtual int	joinChannelWithUserAccount (const char *token, const char *channelId, const char *userAccount)=0
virtual int	joinChannelWithUserAccount (const char *token, const char *channelId, const char *userAccount, const ChannelMediaOptions &options)=0
virtual int	joinChannelWithUserAccountEx (const char *token, const char *channelId, const char *userAccount, const ChannelMediaOptions &options, IRtcEngineEventHandler *eventHandler)=0
virtual int	getUserInfoByUserAccount (const char *userAccount, rtc::UserInfo *userInfo)=0
virtual int	getUserInfoByUid (uid_t uid, rtc::UserInfo *userInfo)=0
virtual int	startOrUpdateChannelMediaRelay (const ChannelMediaRelayConfiguration &configuration)=0
virtual int	stopChannelMediaRelay ()=0
virtual int	pauseAllChannelMediaRelay ()=0
virtual int	resumeAllChannelMediaRelay ()=0
virtual int	setDirectCdnStreamingAudioConfiguration (AUDIO_PROFILE_TYPE profile)=0
virtual int	setDirectCdnStreamingVideoConfiguration (const VideoEncoderConfiguration &config)=0
virtual int	startDirectCdnStreaming (IDirectCdnStreamingEventHandler *eventHandler, const char *publishUrl, const DirectCdnStreamingMediaOptions &options)=0
virtual int	stopDirectCdnStreaming ()=0
virtual int	updateDirectCdnStreamingMediaOptions (const DirectCdnStreamingMediaOptions &options)=0
virtual int	startRhythmPlayer (const char *sound1, const char *sound2, const AgoraRhythmPlayerConfig &config)=0
virtual int	stopRhythmPlayer ()=0
virtual int	configRhythmPlayer (const AgoraRhythmPlayerConfig &config)=0
virtual int	takeSnapshot (uid_t uid, const char *filePath)=0
virtual int	takeSnapshot (uid_t uid, const media::SnapshotConfig &config)=0
virtual int	enableContentInspect (bool enabled, const media::ContentInspectConfig &config)=0
virtual int	adjustCustomAudioPublishVolume (track_id_t trackId, int volume)=0
virtual int	adjustCustomAudioPlayoutVolume (track_id_t trackId, int volume)=0
virtual int	setCloudProxy (CLOUD_PROXY_TYPE proxyType)=0
virtual int	setLocalAccessPoint (const LocalAccessPointConfiguration &config)=0
virtual int	setAdvancedAudioOptions (AdvancedAudioOptions &options, int sourceType=0)=0
virtual int	setAVSyncSource (const char *channelId, uid_t uid)=0
virtual int	enableVideoImageSource (bool enable, const ImageTrackOptions &options)=0
virtual int64_t	getCurrentMonotonicTimeInMs ()=0
virtual int	getNetworkType ()=0
virtual int	setParameters (const char *parameters)=0
virtual int	startMediaRenderingTracing ()=0
virtual int	enableInstantMediaRendering ()=0
virtual uint64_t	getNtpWallTimeInMs ()=0
virtual bool	isFeatureAvailableOnDevice (FeatureType type)=0
virtual int	sendAudioMetadata (const char *metadata, size_t length)=0
virtual int	queryHDRCapability (VIDEO_MODULE_TYPE videoModule, HDR_CAPABILITY &capability)=0
Public Member Functions inherited from agora::base::IEngineBase
virtual	~IEngineBase ()

Additional Inherited Members
Static Public Member Functions inherited from agora::rtc::IRtcEngine
static AGORA_CPP_API void	release (RtcEngineReleaseCallback callback=nullptr)

Member Function Documentation

joinChannelEx()

virtual int agora::rtc::IRtcEngineEx::joinChannelEx ( const char * token, const RtcConnection & connection, const ChannelMediaOptions & options, IRtcEngineEventHandler * eventHandler )

pure virtual

Joins a channel.

You can call this method multiple times to join more than one channel. If you want to join the same channel from different devices, ensure that the user IDs are different for all devices. Applicable scenarios: This method can be called in scenarios involving multiple channels. Call timing: Call this method after initialize. In a multi-camera capture scenario, you need to call the startPreview(VIDEO_SOURCE_TYPE sourceType) method after calling this method to set the sourceType to VIDEO_SOURCE_CAMERA_SECONDARY, to ensure that the second camera captures normally. Related callbacks: A successful call of this method triggers the following callbacks:

• The local client: The onJoinChannelSuccess and onConnectionStateChanged callbacks.
• The remote client: The onUserJoined callback, if a user joining the channel in the COMMUNICATION profile, or a host joining a channel in the LIVE_BROADCASTING profile. When the connection between the local client and Agora's server is interrupted due to poor network conditions, the SDK tries reconnecting to the server. When the local client successfully rejoins the channel, the SDK triggers the onRejoinChannelSuccess callback on the local client.

Note

If you are already in a channel, you cannot rejoin the channel with the same user ID. Before joining a channel, ensure that the App ID you use to generate a token is the same as that you pass in the initialize method; otherwise, you may fail to join the channel with the token.

Parameters

token	The token generated on your server for authentication. See .Note: (Recommended) If your project has enabled the security mode (using APP ID and Token for authentication), this parameter is required. If you have only enabled the testing mode (using APP ID for authentication), this parameter is optional. You will automatically exit the channel 24 hours after successfully joining in. If you need to join different channels at the same time or switch between channels, Agora recommends using a wildcard token so that you don't need to apply for a new token every time joining a channel. See Secure authentication with tokens.
connection	The connection information. See RtcConnection.
options	The channel media options. See ChannelMediaOptions.
eventHandler	The callback class of IRtcEngineEx. See IRtcEngineEventHandler. You can get the callback events of multiple channels through the eventHandler object passed in this parameter.

Returns

• 0: Success.
• < 0: Failure.
  • -2: The parameter is invalid. For example, the token is invalid, the uid parameter is not set to an integer, or the value of a member in ChannelMediaOptions is invalid. You need to pass in a valid parameter and join the channel again.
  • -3: Fails to initialize the IRtcEngine object. You need to reinitialize the IRtcEngine object.
  • -7: The IRtcEngine object has not been initialized. You need to initialize the IRtcEngine object before calling this method.
  • -8: The internal state of the IRtcEngine object is wrong. The typical cause is that after calling startEchoTest to start a call loop test, you call this method to join the channel without calling stopEchoTest to stop the test. You need to call stopEchoTest before calling this method.
  • -17: The request to join the channel is rejected. The typical cause is that the user is already in the channel. Agora recommends that you use the onConnectionStateChanged callback to see whether the user is in the channel. Do not call this method to join the channel unless you receive the CONNECTION_STATE_DISCONNECTED (1) state.
  • -102: The channel name is invalid. You need to pass in a valid channel name in channelId to rejoin the channel.
  • -121: The user ID is invalid. You need to pass in a valid user ID in uid to rejoin the channel.

leaveChannelEx() [1/2]

virtual int agora::rtc::IRtcEngineEx::leaveChannelEx ( const RtcConnection & connection )

pure virtual

Leaves a channel.

After calling this method, the SDK terminates the audio and video interaction, leaves the current channel, and releases all resources related to the session. After calling joinChannelEx to join a channel, you must call this method or leaveChannelEx(const RtcConnection& connection, const LeaveChannelOptions& options) to end the call, otherwise, the next call cannot be started. Applicable scenarios: This method can be called in scenarios involving multiple channels. Call timing: Call this method after joinChannelEx. Related callbacks: A successful call of this method triggers the following callbacks:

• The local client: The onLeaveChannel callback will be triggered.
• The remote client: The onUserOffline callback will be triggered after the remote host leaves the channel.

Note

If you call release immediately after calling this method, the SDK does not trigger the onLeaveChannel callback.

• This method call is asynchronous. When this method returns, it does not necessarily mean that the user has left the channel.
• If you call leaveChannel() or leaveChannel(const LeaveChannelOptions& options), you will leave all the channels you have joined by calling joinChannel(const char* token, const char* channelId, const char* info, uid_t uid), joinChannel(const char* token, const char* channelId, uid_t uid, const ChannelMediaOptions& options), or joinChannelEx.

Parameters

connection

The connection information. See RtcConnection.

Returns

• 0: Success.
• < 0: Failure.

leaveChannelEx() [2/2]

virtual int agora::rtc::IRtcEngineEx::leaveChannelEx ( const RtcConnection & connection, const LeaveChannelOptions & options )

pure virtual

Sets channel options and leaves the channel.

After calling this method, the SDK terminates the audio and video interaction, leaves the current channel, and releases all resources related to the session. After calling joinChannelEx to join a channel, you must call this method or leaveChannelEx(const RtcConnection& connection) to end the call, otherwise, the next call cannot be started. Applicable scenarios: This method can be called in scenarios involving multiple channels. Call timing: Call this method after joinChannelEx. Related callbacks: A successful call of this method triggers the following callbacks:

• The local client: The onLeaveChannel callback will be triggered.
• The remote client: The onUserOffline callback will be triggered after the remote host leaves the channel.

Note

If you call release immediately after calling this method, the SDK does not trigger the onLeaveChannel callback.

• This method call is asynchronous. When this method returns, it does not necessarily mean that the user has left the channel.
• If you call leaveChannel() or leaveChannel(const LeaveChannelOptions& options), you will leave all the channels you have joined by calling joinChannel(const char* token, const char* channelId, const char* info, uid_t uid), joinChannel(const char* token, const char* channelId, uid_t uid, const ChannelMediaOptions& options), or joinChannelEx.

Parameters

connection	The connection information. See RtcConnection.
options	Since v4.1.0 The options for leaving the channel. See LeaveChannelOptions. Note: This parameter only supports the stopMicrophoneRecording member in the LeaveChannelOptions settings; setting other members does not take effect.

Returns

• 0: Success.
• < 0: Failure.

leaveChannelWithUserAccountEx() [1/2]

virtual int agora::rtc::IRtcEngineEx::leaveChannelWithUserAccountEx ( const char * channelId, const char * userAccount )

pure virtual

Leaves a channel with the channel ID and user account.

This method allows a user to leave the channel, for example, by hanging up or exiting a call.

This method is an asynchronous call, which means that the result of this method returns even before the user has not actually left the channel. Once the user successfully leaves the channel, the SDK triggers the onLeaveChannel callback.

Parameters

channelId

The channel name. The maximum length of this parameter is 64 bytes. Supported character scopes are: All lowercase English letters: a to z. All uppercase English letters: A to Z. All numeric characters: 0 to 9. The space character. Punctuation characters and other symbols, including: "!", "#", "$", "%", "&", "(", ")", "+", "-", ":", ";", "<", "=", ".", ">", "?", "@", "[", "]", "^", "_", " {", "}", "|", "~", ",".

userAccount

The user account. The maximum length of this parameter is 255 bytes. Ensure that you set this parameter and do not set it as null. Supported character scopes are: All lowercase English letters: a to z. All uppercase English letters: A to Z. All numeric characters: 0 to 9. The space character. Punctuation characters and other symbols, including: "!", "#", "$", "%", "&", "(", ")", "+", "-", ":", ";", "<", "=", ".", ">", "?", "@", "[", "]", "^", "_", " {", "}", "|", "~", ",".

Returns

• 0: Success.
• < 0: Failure.

leaveChannelWithUserAccountEx() [2/2]

virtual int agora::rtc::IRtcEngineEx::leaveChannelWithUserAccountEx ( const char * channelId, const char * userAccount, const LeaveChannelOptions & options )

pure virtual

Leaves a channel with the channel ID and user account and sets the options for leaving.

Parameters

channelId	The channel name. The maximum length of this parameter is 64 bytes. Supported character scopes are: All lowercase English letters: a to z. All uppercase English letters: A to Z. All numeric characters: 0 to 9. The space character. Punctuation characters and other symbols, including: "!", "#", "$", "%", "&", "(", ")", "+", "-", ":", ";", "<", "=", ".", ">", "?", "@", "[", "]", "^", "_", " {", "}", "|", "~", ",".
userAccount	The user account. The maximum length of this parameter is 255 bytes. Ensure that you set this parameter and do not set it as null. Supported character scopes are: All lowercase English letters: a to z. All uppercase English letters: A to Z. All numeric characters: 0 to 9. The space character. Punctuation characters and other symbols, including: "!", "#", "$", "%", "&", "(", ")", "+", "-", ":", ";", "<", "=", ".", ">", "?", "@", "[", "]", "^", "_", " {", "}", "|", "~", ",".
options	The options for leaving the channel. See LeaveChannelOptions.

Returns

int

• 0: Success.
• < 0: Failure.

updateChannelMediaOptionsEx()

virtual int agora::rtc::IRtcEngineEx::updateChannelMediaOptionsEx ( const ChannelMediaOptions & options, const RtcConnection & connection )

pure virtual

Updates the channel media options after joining the channel.

Parameters

options	The channel media options. See ChannelMediaOptions.
connection	The connection information. See RtcConnection.

Returns

• 0: Success.
• < 0: Failure.
  • -2: The value of a member in ChannelMediaOptions is invalid. For example, the token or the user ID is invalid. You need to fill in a valid parameter.
  • -7: The IRtcEngine object has not been initialized. You need to initialize the IRtcEngine object before calling this method.
  • -8: The internal state of the IRtcEngine object is wrong. The possible reason is that the user is not in the channel. Agora recommends that you use the onConnectionStateChanged callback to see whether the user is in the channel. If you receive the CONNECTION_STATE_DISCONNECTED (1) or CONNECTION_STATE_FAILED (5) state, the user is not in the channel. You need to call joinChannel(const char* token, const char* channelId, uid_t uid, const ChannelMediaOptions& options) to join a channel before calling this method.

setVideoEncoderConfigurationEx()

virtual int agora::rtc::IRtcEngineEx::setVideoEncoderConfigurationEx ( const VideoEncoderConfiguration & config, const RtcConnection & connection )

pure virtual

Sets the video encoder configuration.

Sets the encoder configuration for the local video. Each configuration profile corresponds to a set of video parameters, including the resolution, frame rate, and bitrate. Call timing: Call this method after joinChannelEx.

Note

The config specified in this method is the maximum value under ideal network conditions. If the video engine cannot render the video using the specified config due to unreliable network conditions, the parameters further down the list are considered until a successful configuration is found.

Parameters

config	Video profile. See VideoEncoderConfiguration.
connection	The connection information. See RtcConnection.

Returns

• 0: Success.
• < 0: Failure.

setupRemoteVideoEx()

virtual int agora::rtc::IRtcEngineEx::setupRemoteVideoEx ( const VideoCanvas & canvas, const RtcConnection & connection )

pure virtual

Initializes the video view of a remote user.

This method initializes the video view of a remote stream on the local device. It affects only the video view that the local user sees. Call this method to bind the remote video stream to a video view and to set the rendering and mirror modes of the video view. The application specifies the uid of the remote video in the VideoCanvas method before the remote user joins the channel. If the remote uid is unknown to the application, set it after the application receives the onUserJoined callback. If the Video Recording function is enabled, the Video Recording Service joins the channel as a dummy client, causing other clients to also receive the onUserJoined callback. Do not bind the dummy client to the application view because the dummy client does not send any video streams. To unbind the remote user from the view, set the view parameter to NULL. Once the remote user leaves the channel, the SDK unbinds the remote user.

Note

• Call this method after joinChannelEx.
• To update the rendering or mirror mode of the remote video view during a call, use the setRemoteRenderModeEx method.

Parameters

canvas	The remote video view settings. See VideoCanvas.
connection	The connection information. See RtcConnection.

Returns

• 0: Success.
• < 0: Failure.

muteRemoteAudioStreamEx()

virtual int agora::rtc::IRtcEngineEx::muteRemoteAudioStreamEx ( uid_t uid, bool mute, const RtcConnection & connection )

pure virtual

Stops or resumes receiving the audio stream of a specified user.

This method is used to stops or resumes receiving the audio stream of a specified user. You can call this method before or after joining a channel. If a user leaves a channel, the settings in this method become invalid.

Parameters

uid	The ID of the specified user.
mute	Whether to stop receiving the audio stream of the specified user: true: Stop receiving the audio stream of the specified user. false: (Default) Resume receiving the audio stream of the specified user.
connection	The connection information. See RtcConnection.

Returns

• 0: Success.
• < 0: Failure.

muteRemoteVideoStreamEx()

virtual int agora::rtc::IRtcEngineEx::muteRemoteVideoStreamEx ( uid_t uid, bool mute, const RtcConnection & connection )

pure virtual

Stops or resumes receiving the video stream of a specified user.

This method is used to stop or resume receiving the video stream of a specified user. You can call this method before or after joining a channel. If a user leaves a channel, the settings in this method become invalid.

Parameters

uid	The user ID of the remote user.
mute	Whether to stop receiving the video stream of the specified user: true: Stop receiving the video stream of the specified user. false: (Default) Resume receiving the video stream of the specified user.
connection	The connection information. See RtcConnection.

Returns

• 0: Success.
• < 0: Failure.

setRemoteVideoStreamTypeEx()

virtual int agora::rtc::IRtcEngineEx::setRemoteVideoStreamTypeEx ( uid_t uid, VIDEO_STREAM_TYPE streamType, const RtcConnection & connection )

pure virtual

Sets the video stream type to subscribe to.

Depending on the default behavior of the sender and the specific settings when calling setDualStreamMode(SIMULCAST_STREAM_MODE mode, const SimulcastStreamConfig& streamConfig), the scenarios for the receiver calling this method are as follows:

• The SDK enables low-quality video stream adaptive mode ( AUTO_SIMULCAST_STREAM ) on the sender side by default, meaning only the high-quality video stream is transmitted. Only the receiver with the role of the **host**can call this method to initiate a low-quality video stream request. Once the sender receives the request, it starts automatically sending the low-quality video stream. At this point, all users in the channel can call this method to switch to low-quality video stream subscription mode.
• If the sender calls setDualStreamMode(SIMULCAST_STREAM_MODE mode, const SimulcastStreamConfig& streamConfig) and sets mode to DISABLE_SIMULCAST_STREAM (never send low-quality video stream), then calling this method will have no effect.
• If the sender calls setDualStreamMode(SIMULCAST_STREAM_MODE mode, const SimulcastStreamConfig& streamConfig) and sets mode to ENABLE_SIMULCAST_STREAM (always send low-quality video stream), both the host and audience receivers can call this method to switch to low-quality video stream subscription mode. The SDK will dynamically adjust the size of the corresponding video stream based on the size of the video window to save bandwidth and computing resources. The default aspect ratio of the low-quality video stream is the same as that of the high-quality video stream. According to the current aspect ratio of the high-quality video stream, the system will automatically allocate the resolution, frame rate, and bitrate of the low-quality video stream.

Note

If the publisher has already called setDualStreamModeEx and set mode to DISABLE_SIMULCAST_STREAM (never send low-quality video stream), calling this method will not take effect, you should call setDualStreamModeEx again on the sending end and adjust the settings.

Parameters

uid	The user ID.
streamType	The video stream type, see VIDEO_STREAM_TYPE.
connection	The connection information. See RtcConnection.

Returns

• 0: Success.
• < 0: Failure.

muteLocalAudioStreamEx()

virtual int agora::rtc::IRtcEngineEx::muteLocalAudioStreamEx ( bool mute, const RtcConnection & connection )

pure virtual

Stops or resumes publishing the local audio stream.

A successful call of this method triggers the onUserMuteAudio and onRemoteAudioStateChanged callbacks on the remote client.

Note

This method does not affect any ongoing audio recording, because it does not disable the audio capture device.

Parameters

mute	Whether to stop publishing the local audio stream: true: Stops publishing the local audio stream. false: (Default) Resumes publishing the local audio stream.
connection	The connection information. See RtcConnection.

Returns

• 0: Success.
• < 0: Failure.

muteLocalVideoStreamEx()

virtual int agora::rtc::IRtcEngineEx::muteLocalVideoStreamEx ( bool mute, const RtcConnection & connection )

pure virtual

Stops or resumes publishing the local video stream.

A successful call of this method triggers the onUserMuteVideo callback on the remote client.

Note

This method does not affect any ongoing video recording, because it does not disable the camera.

Parameters

mute	Whether to stop publishing the local video stream. true: Stop publishing the local video stream. false: (Default) Publish the local video stream.
connection	The connection information. See RtcConnection.

Returns

• 0: Success.
• < 0: Failure.

muteAllRemoteAudioStreamsEx()

virtual int agora::rtc::IRtcEngineEx::muteAllRemoteAudioStreamsEx ( bool mute, const RtcConnection & connection )

pure virtual

Stops or resumes subscribing to the audio streams of all remote users.

After successfully calling this method, the local user stops or resumes subscribing to the audio streams of all remote users, including the ones join the channel subsequent to this call.

Note

• Call this method after joining a channel.
• If you do not want to subscribe the audio streams of remote users before joining a channel, you can set autoSubscribeAudio as false when calling joinChannel(const char* token, const char* channelId, uid_t uid, const ChannelMediaOptions& options).

Parameters

mute	Whether to stop subscribing to the audio streams of all remote users: true: Stops subscribing to the audio streams of all remote users. false: (Default) Subscribes to the audio streams of all remote users by default.
connection	The connection information. See RtcConnection.

Returns

• 0: Success.
• < 0: Failure.

muteAllRemoteVideoStreamsEx()

virtual int agora::rtc::IRtcEngineEx::muteAllRemoteVideoStreamsEx ( bool mute, const RtcConnection & connection )

pure virtual

Stops or resumes subscribing to the video streams of all remote users.

After successfully calling this method, the local user stops or resumes subscribing to the video streams of all remote users, including all subsequent users.

Parameters

mute	Whether to stop subscribing to the video streams of all remote users. true: Stop subscribing to the video streams of all remote users. false: (Default) Subscribe to the video streams of all remote users by default.
connection	The connection information. See RtcConnection.

Returns

• 0: Success.
• < 0: Failure.

setSubscribeAudioBlocklistEx()

virtual int agora::rtc::IRtcEngineEx::setSubscribeAudioBlocklistEx ( uid_t * uidList, int uidNumber, const RtcConnection & connection )

pure virtual

Sets the blocklist of subscriptions for audio streams.

You can call this method to specify the audio streams of a user that you do not want to subscribe to.

Note

• You can call this method either before or after joining a channel.
• The blocklist is not affected by the setting in muteRemoteAudioStream, muteAllRemoteAudioStreams, and autoSubscribeAudio in ChannelMediaOptions.
• Once the blocklist of subscriptions is set, it is effective even if you leave the current channel and rejoin the channel.
• If a user is added in the allowlist and blocklist at the same time, only the blocklist takes effect.

Parameters

uidList	The user ID list of users that you do not want to subscribe to. If you want to specify the audio streams of a user that you do not want to subscribe to, add the user ID in this list. If you want to remove a user from the blocklist, you need to call the setSubscribeAudioBlocklist method to update the user ID list; this means you only add the uid of users that you do not want to subscribe to in the new user ID list.
uidNumber	The number of users in the user ID list.
connection	The connection information. See RtcConnection.

Returns

• 0: Success.
• < 0: Failure.

setSubscribeAudioAllowlistEx()

virtual int agora::rtc::IRtcEngineEx::setSubscribeAudioAllowlistEx ( uid_t * uidList, int uidNumber, const RtcConnection & connection )

pure virtual

Sets the allowlist of subscriptions for audio streams.

You can call this method to specify the audio streams of a user that you want to subscribe to.

Note

• You can call this method either before or after joining a channel.
• The allowlist is not affected by the setting in muteRemoteAudioStream, muteAllRemoteAudioStreams and autoSubscribeAudio in ChannelMediaOptions.
• Once the allowlist of subscriptions is set, it is effective even if you leave the current channel and rejoin the channel.
• If a user is added in the allowlist and blocklist at the same time, only the blocklist takes effect.

Parameters

uidList	The user ID list of users that you want to subscribe to. If you want to specify the audio streams of a user for subscription, add the user ID in this list. If you want to remove a user from the allowlist, you need to call the setSubscribeAudioAllowlist method to update the user ID list; this means you only add the uid of users that you want to subscribe to in the new user ID list.
uidNumber	The number of users in the user ID list.
connection	The connection information. See RtcConnection.

Returns

• 0: Success.
• < 0: Failure.

setSubscribeVideoBlocklistEx()

virtual int agora::rtc::IRtcEngineEx::setSubscribeVideoBlocklistEx ( uid_t * uidList, int uidNumber, const RtcConnection & connection )

pure virtual

Sets the blocklist of subscriptions for video streams.

You can call this method to specify the video streams of a user that you do not want to subscribe to.

Note

• You can call this method either before or after joining a channel.
• The blocklist is not affected by the setting in muteRemoteVideoStream, muteAllRemoteVideoStreams and autoSubscribeAudio in ChannelMediaOptions.
• Once the blocklist of subscriptions is set, it is effective even if you leave the current channel and rejoin the channel.
• If a user is added in the allowlist and blocklist at the same time, only the blocklist takes effect.

Parameters

uidList	The user ID list of users that you do not want to subscribe to. If you want to specify the video streams of a user that you do not want to subscribe to, add the user ID of that user in this list. If you want to remove a user from the blocklist, you need to call the setSubscribeVideoBlocklist method to update the user ID list; this means you only add the uid of users that you do not want to subscribe to in the new user ID list.
uidNumber	The number of users in the user ID list.
connection	The connection information. See RtcConnection.

Returns

• 0: Success.
• < 0: Failure.

setSubscribeVideoAllowlistEx()

virtual int agora::rtc::IRtcEngineEx::setSubscribeVideoAllowlistEx ( uid_t * uidList, int uidNumber, const RtcConnection & connection )

pure virtual

Sets the allowlist of subscriptions for video streams.

You can call this method to specify the video streams of a user that you want to subscribe to.

Note

• You can call this method either before or after joining a channel.
• The allowlist is not affected by the setting in muteRemoteVideoStream, muteAllRemoteVideoStreams and autoSubscribeAudio in ChannelMediaOptions.
• Once the allowlist of subscriptions is set, it is effective even if you leave the current channel and rejoin the channel.
• If a user is added in the allowlist and blocklist at the same time, only the blocklist takes effect.

Parameters

uidList	The user ID list of users that you want to subscribe to. If you want to specify the video streams of a user for subscription, add the user ID of that user in this list. If you want to remove a user from the allowlist, you need to call the setSubscribeVideoAllowlist method to update the user ID list; this means you only add the uid of users that you want to subscribe to in the new user ID list.
uidNumber	The number of users in the user ID list.
connection	The connection information. See RtcConnection.

Returns

• 0: Success.
• < 0: Failure.

setRemoteVideoSubscriptionOptionsEx()

virtual int agora::rtc::IRtcEngineEx::setRemoteVideoSubscriptionOptionsEx ( uid_t uid, const VideoSubscriptionOptions & options, const RtcConnection & connection )

pure virtual

Sets options for subscribing to remote video streams.

When a remote user has enabled dual-stream mode, you can call this method to choose the option for subscribing to the video streams sent by the remote user.

Parameters

uid	The user ID of the remote user.
options	The video subscription options. See VideoSubscriptionOptions.
connection	The connection information. See RtcConnection.

Returns

• 0: Success.
• < 0: Failure.

setRemoteVoicePositionEx()

virtual int agora::rtc::IRtcEngineEx::setRemoteVoicePositionEx ( uid_t uid, double pan, double gain, const RtcConnection & connection )

pure virtual

Sets the 2D position (the position on the horizontal plane) of the remote user's voice.

This method sets the voice position and volume of a remote user. When the local user calls this method to set the voice position of a remote user, the voice difference between the left and right channels allows the local user to track the real-time position of the remote user, creating a sense of space. This method applies to massive multiplayer online games, such as Battle Royale games.

Note

• For the best voice positioning, Agora recommends using a wired headset.
• Call this method after joining a channel.

Parameters

uid	The user ID of the remote user.
pan	The voice position of the remote user. The value ranges from -1.0 to 1.0: -1.0: The remote voice comes from the left. 0.0: (Default) The remote voice comes from the front. 1.0: The remote voice comes from the right.
gain	The volume of the remote user. The value ranges from 0.0 to 100.0. The default value is 100.0 (the original volume of the remote user). The smaller the value, the lower the volume.
connection	The connection information. See RtcConnection.

Returns

• 0: Success.
• < 0: Failure.

setRemoteUserSpatialAudioParamsEx()

virtual int agora::rtc::IRtcEngineEx::setRemoteUserSpatialAudioParamsEx ( uid_t uid, const agora::SpatialAudioParams & params, const RtcConnection & connection )

pure virtual

Sets remote user parameters for spatial audio

Parameters

uid	The ID of the remote user.
param	Spatial audio parameters. See SpatialAudioParams.
connection	The RtcConnection object.

Returns

int

• 0: Success.
• < 0: Failure.

setRemoteRenderModeEx()

virtual int agora::rtc::IRtcEngineEx::setRemoteRenderModeEx ( uid_t uid, media::base::RENDER_MODE_TYPE renderMode, VIDEO_MIRROR_MODE_TYPE mirrorMode, const RtcConnection & connection )

pure virtual

Sets the video display mode of a specified remote user.

After initializing the video view of a remote user, you can call this method to update its rendering and mirror modes. This method affects only the video view that the local user sees.

Note

• Call this method after initializing the remote view by calling the setupRemoteVideo method.
• During a call, you can call this method as many times as necessary to update the display mode of the video view of a remote user.

Parameters

uid	The user ID of the remote user.
renderMode	The video display mode of the remote user. See RENDER_MODE_TYPE.
mirrorMode	The mirror mode of the remote user view. See VIDEO_MIRROR_MODE_TYPE.
connection	The connection information. See RtcConnection.

Returns

• 0: Success.
• < 0: Failure.

enableLoopbackRecordingEx()

virtual int agora::rtc::IRtcEngineEx::enableLoopbackRecordingEx ( const RtcConnection & connection, bool enabled, const char * deviceName = NULL )

pure virtual

Enables loopback audio capturing.

If you enable loopback audio capturing, the output of the sound card is mixed into the audio stream sent to the other end.

Note

• This method applies to the macOS and Windows only.
• macOS does not support loopback audio capture of the default sound card. If you need to use this function, use a virtual sound card and pass its name to the deviceName parameter. Agora recommends using AgoraALD as the virtual sound card for audio capturing.
• This method only supports using one sound card for audio capturing.

Parameters

connection	The connection information. See RtcConnection.
enabled	Sets whether to enable loopback audio capture: true: Enable loopback audio capturing. false: (Default) Disable loopback audio capturing.
deviceName	- macOS: The device name of the virtual sound card. The default value is set to NULL, which means using AgoraALD for loopback audio capturing. Windows: The device name of the sound card. The default is set to NULL, which means the SDK uses the sound card of your device for loopback audio capturing.

Returns

• 0: Success.
• < 0: Failure.

adjustRecordingSignalVolumeEx()

virtual int agora::rtc::IRtcEngineEx::adjustRecordingSignalVolumeEx ( int volume, const RtcConnection & connection )

pure virtual

Adjusts the recording volume.

Parameters

volume	The recording volume, which ranges from 0 to 400: 0 : Mute the recording volume. 100: The original volume. 400: (Maximum) Four times the original volume with signal clipping protection.
connection	The RtcConnection object.

Returns

• 0 : Success.
• < 0: Failure.

muteRecordingSignalEx()

virtual int agora::rtc::IRtcEngineEx::muteRecordingSignalEx ( bool mute, const RtcConnection & connection )

pure virtual

Mute or resume recording signal volume.

Parameters

mute	Determines whether to mute or resume the recording signal volume. true: Mute the recording signal volume. false: (Default) Resume the recording signal volume.
connection	The RtcConnection object.

Returns

• 0 : Success.
• < 0: Failure.

adjustUserPlaybackSignalVolumeEx()

virtual int agora::rtc::IRtcEngineEx::adjustUserPlaybackSignalVolumeEx ( uid_t uid, int volume, const RtcConnection & connection )

pure virtual

Adjusts the playback signal volume of a specified remote user.

You can call this method to adjust the playback volume of a specified remote user. To adjust the playback volume of different remote users, call the method as many times, once for each remote user. Call timing: Call this method after joinChannelEx.

Parameters

uid	The user ID of the remote user.
volume	The volume of the user. The value range is [0,400]. 0: Mute. 100: (Default) The original volume. 400: Four times the original volume (amplifying the audio signals by four times).
connection	The connection information. See RtcConnection.

Returns

• 0: Success.
• < 0: Failure.

getConnectionStateEx()

virtual CONNECTION_STATE_TYPE agora::rtc::IRtcEngineEx::getConnectionStateEx ( const RtcConnection & connection )

pure virtual

Gets the current connection state of the SDK.

Call timing: This method can be called either before or after joining the channel.

Parameters

connection

The connection information. See RtcConnection.

Returns

The current connection state. See CONNECTION_STATE_TYPE.

enableEncryptionEx()

virtual int agora::rtc::IRtcEngineEx::enableEncryptionEx ( const RtcConnection & connection, bool enabled, const EncryptionConfig & config )

pure virtual

Enables or disables the built-in encryption.

After the user leaves the channel, the SDK automatically disables the built-in encryption. To enable the built-in encryption, call this method before the user joins the channel again. Applicable scenarios: Scenarios with higher security requirements. Call timing: Call this method before joining a channel.

Note

• All users within the same channel must set the same encryption configurations when calling this method.
• If you enable the built-in encryption, you cannot use the Media Push function.

Parameters

enabled	Whether to enable built-in encryption: true: Enable the built-in encryption. false: (Default) Disable the built-in encryption.
config	Built-in encryption configurations. See EncryptionConfig.
connection	The connection information. See RtcConnection.

Returns

• 0: Success.
• < 0: Failure.

createDataStreamEx() [1/2]

virtual int agora::rtc::IRtcEngineEx::createDataStreamEx ( int * streamId, bool reliable, bool ordered, const RtcConnection & connection )

pure virtual

Creates a data stream.

You can call this method to create a data stream and improve the reliability and ordering of data transmission. Call timing: Call this method after joinChannelEx. Related callbacks: After setting reliable to true, if the recipient does not receive the data within five seconds, the SDK triggers the onStreamMessageError callback and returns an error code.

Note

Each user can create up to five data streams during the lifecycle of IRtcEngine. The data stream will be destroyed when leaving the channel, and the data stream needs to be recreated if needed.

Parameters

streamId	An output parameter; the ID of the data stream created.
reliable	Sets whether the recipients are guaranteed to receive the data stream within five seconds: true: The recipients receive the data from the sender within five seconds. If the recipient does not receive the data within five seconds, the SDK triggers the onStreamMessageError callback and returns an error code. false: There is no guarantee that the recipients receive the data stream within five seconds and no error message is reported for any delay or missing data stream. Attention: Please ensure that reliable and ordered are either both set totrue or both set to false.
ordered	Sets whether the recipients receive the data stream in the sent order: true: The recipients receive the data in the sent order. false: The recipients do not receive the data in the sent order.
connection	The connection information. See RtcConnection.

Returns

• 0: The data stream is successfully created.
• < 0: Failure.

createDataStreamEx() [2/2]

virtual int agora::rtc::IRtcEngineEx::createDataStreamEx ( int * streamId, const DataStreamConfig & config, const RtcConnection & connection )

pure virtual

Creates a data stream.

Compared to createDataStreamEx(int* streamId, bool reliable, bool ordered, const RtcConnection& connection), this method does not guarantee the reliability of data transmission. If a data packet is not received five seconds after it was sent, the SDK directly discards the data. Call timing: Call this method after joinChannelEx.

Note

Each user can create up to five data streams during the lifecycle of IRtcEngine. The data stream will be destroyed when leaving the channel, and the data stream needs to be recreated if needed. If you need a more comprehensive solution for low-latency, high-concurrency, and scalable real-time messaging and status synchronization, it is recommended to use Signaling.

Parameters

streamId	An output parameter; the ID of the data stream created.
config	The configurations for the data stream. See DataStreamConfig.
connection	The connection information. See RtcConnection.

Returns

• 0: The data stream is successfully created.
• < 0: Failure.

sendStreamMessageEx()

virtual int agora::rtc::IRtcEngineEx::sendStreamMessageEx ( int streamId, const char * data, size_t length, const RtcConnection & connection )

pure virtual

Sends data stream messages.

After calling createDataStreamEx(int* streamId, const DataStreamConfig& config, const RtcConnection& connection), you can call this method to send data stream messages to all users in the channel. The SDK has the following restrictions on this method:

• Each client within the channel can have up to 5 data channels simultaneously, with a total shared packet bitrate limit of 30 KB/s for all data channels.
• Each data channel can send up to 60 packets per second, with each packet being a maximum of 1 KB. A successful method call triggers the onStreamMessage callback on the remote client, from which the remote user gets the stream message. A failed method call triggers the onStreamMessageError callback on the remote client.

Note

• If you need a more comprehensive solution for low-latency, high-concurrency, and scalable real-time messaging and status synchronization, it is recommended to use Signaling.
• Call this method after joinChannelEx.
• Ensure that you call createDataStreamEx(int* streamId, const DataStreamConfig& config, const RtcConnection& connection) to create a data channel before calling this method.

Parameters

streamId	The data stream ID. You can get the data stream ID by calling createDataStreamEx(int* streamId, const DataStreamConfig& config, const RtcConnection& connection)
data	The message to be sent.
length	The length of the data.
connection	The connection information. See RtcConnection.

Returns

• 0: Success.
• < 0: Failure.

sendRdtMessageEx()

virtual int agora::rtc::IRtcEngineEx::sendRdtMessageEx ( uid_t uid, RdtStreamType type, const char * data, size_t length, const RtcConnection & connection )

pure virtual

Send Reliable message to remote uid in channel.

@technical preview

Parameters

uid	Remote user id.
type	Reliable Data Transmission tunnel message type. See RdtStreamType
data	The pointer to the sent data.
length	The length of the sent data.
connection	The RtcConnection object.

Returns

• 0: Success.
• < 0: Failure.

sendMediaControlMessageEx()

virtual int agora::rtc::IRtcEngineEx::sendMediaControlMessageEx ( uid_t uid, const char * data, size_t length, const RtcConnection & connection )

pure virtual

Send media control message.

@technical preview

Parameters

uid	Remote user id. In particular, if the uid is set to 0, it means broadcasting the message to the entire channel.
data	The pointer to the sent data.
length	The length of the sent data, max 1024.
connection	The RtcConnection object.

Returns

• 0: Success.
• < 0: Failure.

addVideoWatermarkEx() [1/2]

virtual int agora::rtc::IRtcEngineEx::addVideoWatermarkEx ( const char * watermarkUrl, const WatermarkOptions & options, const RtcConnection & connection )

pure virtual

Adds a watermark image to the local video.

Deprecated

v4.6.0. This method is deprecated. Use addVideoWatermarkEx(const WatermarkConfig& config, const RtcConnection& connection) instead.

This method adds a PNG watermark image to the local video in the live streaming. Once the watermark image is added, all the audience in the channel (CDN audience included), and the capturing device can see and capture it. The Agora SDK supports adding only one watermark image onto a live video stream. The newly added watermark image replaces the previous one. The watermark coordinates are dependent on the settings in the setVideoEncoderConfigurationEx method:

• If the orientation mode of the encoding video ( ORIENTATION_MODE ) is fixed landscape mode or the adaptive landscape mode, the watermark uses the landscape orientation.
• If the orientation mode of the encoding video ( ORIENTATION_MODE ) is fixed portrait mode or the adaptive portrait mode, the watermark uses the portrait orientation.
• When setting the watermark position, the region must be less than the dimensions set in the setVideoEncoderConfigurationEx method; otherwise, the watermark image will be cropped.

Note

• Ensure that you have called enableVideo before calling this method.
• This method supports adding a watermark image in the PNG file format only. Supported pixel formats of the PNG image are RGBA, RGB, Palette, Gray, and Alpha_gray.
• If the dimensions of the PNG image differ from your settings in this method, the image will be cropped or zoomed to conform to your settings.
• If you have enabled the local video preview by calling the startPreview(VIDEO_SOURCE_TYPE sourceType) method, you can use the visibleInPreview member to set whether or not the watermark is visible in the preview.
• If you have enabled the mirror mode for the local video, the watermark on the local video is also mirrored. To avoid mirroring the watermark, Agora recommends that you do not use the mirror and watermark functions for the local video at the same time. You can implement the watermark function in your application layer.

Parameters

watermarkUrl	The local file path of the watermark image to be added. This method supports adding a watermark image from the local absolute or relative file path.
options	The options of the watermark image to be added. See WatermarkOptions.
connection	The connection information. See RtcConnection.

Returns

• 0: Success.
• < 0: Failure.

addVideoWatermarkEx() [2/2]

virtual int agora::rtc::IRtcEngineEx::addVideoWatermarkEx ( const WatermarkConfig & config, const RtcConnection & connection )

pure virtual

Adds a watermark image to the local video.

Since

4.6.0

Applicable scenarios: This method applies to multi-channel scenarios.

Parameters

config	Watermark configuration. See WatermarkConfig.
connection	RtcConnection object. See RtcConnection.

Returns

• 0: Success.
• < 0: Failure.

removeVideoWatermarkEx()

virtual int agora::rtc::IRtcEngineEx::removeVideoWatermarkEx ( const char * id, const RtcConnection & connection )

pure virtual

Removes the specified watermark image from the local or remote video stream.

Since

4.6.0

Applicable scenarios: This method applies to multi-channel scenarios.

Parameters

id	Watermark ID.
connection	RtcConnection object. See RtcConnection.

Returns

• 0: Success.
• < 0: Failure.

clearVideoWatermarkEx()

virtual int agora::rtc::IRtcEngineEx::clearVideoWatermarkEx ( const RtcConnection & connection )

pure virtual

Removes the watermark image from the video stream.

Parameters

connection

The connection information. See RtcConnection.

Returns

• 0: Success.
• < 0: Failure.

sendCustomReportMessageEx()

virtual int agora::rtc::IRtcEngineEx::sendCustomReportMessageEx ( const char * id, const char * category, const char * event, const char * label, int value, const RtcConnection & connection )

pure virtual

Agora supports reporting and analyzing customized messages.

Agora supports reporting and analyzing customized messages. This function is in the beta stage with a free trial. The ability provided in its beta test version is reporting a maximum of 10 message pieces within 6 seconds, with each message piece not exceeding 256 bytes and each string not exceeding 100 bytes. To try out this function, contact support@agora.io and discuss the format of customized messages with us.

enableAudioVolumeIndicationEx()

virtual int agora::rtc::IRtcEngineEx::enableAudioVolumeIndicationEx ( int interval, int smooth, bool reportVad, const RtcConnection & connection )

pure virtual

Enables the reporting of users' volume indication.

This method enables the SDK to regularly report the volume information to the app of the local user who sends a stream and remote users (three users at most) whose instantaneous volumes are the highest. Call timing: Call this method after joinChannelEx. Related callbacks: The SDK triggers the onAudioVolumeIndication callback according to the interval you set if this method is successfully called and there are users publishing streams in the channel.

Parameters

interval	Sets the time interval between two consecutive volume indications: ≤ 0: Disables the volume indication. > 0: Time interval (ms) between two consecutive volume indications. Ensure this parameter is set to a value greater than 10, otherwise you will not receive the onAudioVolumeIndication callback. Agora recommends that this value is set as greater than 100.
smooth	The smoothing factor that sets the sensitivity of the audio volume indicator. The value ranges between 0 and 10. The recommended value is 3. The greater the value, the more sensitive the indicator.
reportVad	- true: Enables the voice activity detection of the local user. Once it is enabled, the vad parameter of the onAudioVolumeIndication callback reports the voice activity status of the local user. false: (Default) Disables the voice activity detection of the local user. Once it is disabled, the vad parameter of the onAudioVolumeIndication callback does not report the voice activity status of the local user, except for the scenario where the engine automatically detects the voice activity of the local user.
connection	The connection information. See RtcConnection.

Returns

• 0: Success.
• < 0: Failure.

startRtmpStreamWithoutTranscodingEx()

virtual int agora::rtc::IRtcEngineEx::startRtmpStreamWithoutTranscodingEx ( const char * url, const RtcConnection & connection )

pure virtual

Starts pushing media streams to a CDN without transcoding.

Agora recommends that you use the server-side Media Push function. For details, see Use RESTful API. You can call this method to push an audio or video stream to the specified CDN address. This method can push media streams to only one CDN address at a time, so if you need to push streams to multiple addresses, call this method multiple times. After you call this method, the SDK triggers the onRtmpStreamingStateChanged callback on the local client to report the state of the streaming.

Note

• Call this method after joining a channel.
• Only hosts in the LIVE_BROADCASTING profile can call this method.
• If you want to retry pushing streams after a failed push, make sure to call stopRtmpStream first, then call this method to retry pushing streams; otherwise, the SDK returns the same error code as the last failed push.

Parameters

url	The address of Media Push. The format is RTMP or RTMPS. The character length cannot exceed 1024 bytes. Special characters such as Chinese characters are not supported.
connection	The connection information. See RtcConnection.

Returns

• 0: Success.
• < 0: Failure.
  • -2: The URL or configuration of transcoding is invalid; check your URL and transcoding configurations.
  • -7: The SDK is not initialized before calling this method.
  • -19: The Media Push URL is already in use; use another URL instead.

startRtmpStreamWithTranscodingEx()

virtual int agora::rtc::IRtcEngineEx::startRtmpStreamWithTranscodingEx ( const char * url, const LiveTranscoding & transcoding, const RtcConnection & connection )

pure virtual

Starts Media Push and sets the transcoding configuration.

Agora recommends that you use the server-side Media Push function. For details, see Use RESTful API. You can call this method to push a live audio-and-video stream to the specified CDN address and set the transcoding configuration. This method can push media streams to only one CDN address at a time, so if you need to push streams to multiple addresses, call this method multiple times. After you call this method, the SDK triggers the onRtmpStreamingStateChanged callback on the local client to report the state of the streaming.

Note

• Ensure that you enable the Media Push service before using this function.
• Call this method after joining a channel.
• Only hosts in the LIVE_BROADCASTING profile can call this method.
• If you want to retry pushing streams after a failed push, make sure to call stopRtmpStreamEx first, then call this method to retry pushing streams; otherwise, the SDK returns the same error code as the last failed push.

Parameters

url	The address of Media Push. The format is RTMP or RTMPS. The character length cannot exceed 1024 bytes. Special characters such as Chinese characters are not supported.
transcoding	The transcoding configuration for Media Push. See LiveTranscoding.
connection	The connection information. See RtcConnection.

Returns

• 0: Success.
• < 0: Failure.
  • -2: The URL or configuration of transcoding is invalid; check your URL and transcoding configurations.
  • -7: The SDK is not initialized before calling this method.
  • -19: The Media Push URL is already in use; use another URL instead.

updateRtmpTranscodingEx()

virtual int agora::rtc::IRtcEngineEx::updateRtmpTranscodingEx ( const LiveTranscoding & transcoding, const RtcConnection & connection )

pure virtual

Updates the transcoding configuration.

Agora recommends that you use the server-side Media Push function. For details, see Use RESTful API. After you start pushing media streams to CDN with transcoding, you can dynamically update the transcoding configuration according to the scenario. The SDK triggers the onTranscodingUpdated callback after the transcoding configuration is updated.

Parameters

transcoding	The transcoding configuration for Media Push. See LiveTranscoding.
connection	The connection information. See RtcConnection.

Returns

• 0: Success.
• < 0: Failure.

stopRtmpStreamEx()

virtual int agora::rtc::IRtcEngineEx::stopRtmpStreamEx ( const char * url, const RtcConnection & connection )

pure virtual

Stops pushing media streams to a CDN.

Agora recommends that you use the server-side Media Push function. For details, see Use RESTful API. You can call this method to stop the live stream on the specified CDN address. This method can stop pushing media streams to only one CDN address at a time, so if you need to stop pushing streams to multiple addresses, call this method multiple times. After you call this method, the SDK triggers the onRtmpStreamingStateChanged callback on the local client to report the state of the streaming.

Parameters

url	The address of Media Push. The format is RTMP or RTMPS. The character length cannot exceed 1024 bytes. Special characters such as Chinese characters are not supported.
connection	The connection information. See RtcConnection.

Returns

• 0: Success.
• < 0: Failure.

startOrUpdateChannelMediaRelayEx()

virtual int agora::rtc::IRtcEngineEx::startOrUpdateChannelMediaRelayEx ( const ChannelMediaRelayConfiguration & configuration, const RtcConnection & connection )

pure virtual

Starts relaying media streams across channels or updates channels for media relay.

Since

v4.2.0

The first successful call to this method starts relaying media streams from the source channel to the destination channels. To relay the media stream to other channels, or exit one of the current media relays, you can call this method again to update the destination channels. This feature supports relaying media streams to a maximum of six destination channels. After a successful method call, the SDK triggers the onChannelMediaRelayStateChanged callback, and this callback returns the state of the media stream relay. Common states are as follows:

• If the onChannelMediaRelayStateChanged callback returns RELAY_STATE_RUNNING (2) and RELAY_OK (0), it means that the SDK starts relaying media streams from the source channel to the destination channel.
• If the onChannelMediaRelayStateChanged callback returns RELAY_STATE_FAILURE (3), an exception occurs during the media stream relay.

Note

• Call this method after joining the channel.
• This method takes effect only when you are a host in a live streaming channel.
• The relaying media streams across channels function needs to be enabled by contacting technical support.
• Agora does not support string user accounts in this API.

Parameters

configuration	The configuration of the media stream relay. See ChannelMediaRelayConfiguration.
connection	The connection information. See RtcConnection.

Returns

• 0: Success.
• < 0: Failure.
  • -1: A general error occurs (no specified reason).
  • -2: The parameter is invalid.
  • -8: Internal state error. Probably because the user is not a broadcaster.

stopChannelMediaRelayEx()

virtual int agora::rtc::IRtcEngineEx::stopChannelMediaRelayEx ( const RtcConnection & connection )

pure virtual

Stops the media stream relay. Once the relay stops, the host quits all the target channels.

After a successful method call, the SDK triggers the onChannelMediaRelayStateChanged callback. If the callback reports RELAY_STATE_IDLE (0) and RELAY_OK (0), the host successfully stops the relay.

Note

If the method call fails, the SDK triggers the onChannelMediaRelayStateChanged callback with the RELAY_ERROR_SERVER_NO_RESPONSE (2) or RELAY_ERROR_SERVER_CONNECTION_LOST (8) status code. You can call the leaveChannel(const LeaveChannelOptions& options) method to leave the channel, and the media stream relay automatically stops.

Parameters

connection

The connection information. See RtcConnection.

Returns

• 0: Success.
• < 0: Failure.
  • -5: The method call was rejected. There is no ongoing channel media relay.

pauseAllChannelMediaRelayEx()

virtual int agora::rtc::IRtcEngineEx::pauseAllChannelMediaRelayEx ( const RtcConnection & connection )

pure virtual

Pauses the media stream relay to all target channels.

After the cross-channel media stream relay starts, you can call this method to pause relaying media streams to all target channels; after the pause, if you want to resume the relay, call resumeAllChannelMediaRelay.

Note

Call this method after startOrUpdateChannelMediaRelayEx.

Parameters

connection

The connection information. See RtcConnection.

Returns

• 0: Success.
• < 0: Failure.
  • -5: The method call was rejected. There is no ongoing channel media relay.

resumeAllChannelMediaRelayEx()

virtual int agora::rtc::IRtcEngineEx::resumeAllChannelMediaRelayEx ( const RtcConnection & connection )

pure virtual

Resumes the media stream relay to all target channels.

After calling the pauseAllChannelMediaRelayEx method, you can call this method to resume relaying media streams to all destination channels.

Note

Call this method after pauseAllChannelMediaRelayEx.

Parameters

connection

The connection information. See RtcConnection.

Returns

• 0: Success.
• < 0: Failure.
  • -5: The method call was rejected. There is no paused channel media relay.

getUserInfoByUserAccountEx()

virtual int agora::rtc::IRtcEngineEx::getUserInfoByUserAccountEx ( const char * userAccount, rtc::UserInfo * userInfo, const RtcConnection & connection )

pure virtual

Gets the user information by passing in the user account. It is same as agora::rtc::IRtcEngine::getUserInfoByUserAccount.

Parameters

	userAccount	The user account of the user. Ensure that you set this parameter.
[in,out]	userInfo	A userInfo object that identifies the user: Input: A userInfo object. Output: A userInfo object that contains the user account and user ID of the user.
	connection	The RtcConnection object.

Returns

• 0: Success.
• < 0: Failure.

getUserInfoByUidEx()

virtual int agora::rtc::IRtcEngineEx::getUserInfoByUidEx ( uid_t uid, rtc::UserInfo * userInfo, const RtcConnection & connection )

pure virtual

Gets the user information by passing in the user ID. It is same as agora::rtc::IRtcEngine::getUserInfoByUid.

Parameters

	uid	The user ID of the remote user. Ensure that you set this parameter.
[in,out]	userInfo	A userInfo object that identifies the user: Input: A userInfo object. Output: A userInfo object that contains the user account and user ID of the user.
	connection	The RtcConnection object.

Returns

• 0: Success.
• < 0: Failure.

enableDualStreamModeEx()

virtual int agora::rtc::IRtcEngineEx::enableDualStreamModeEx ( bool enabled, const SimulcastStreamConfig & streamConfig, const RtcConnection & connection )

pure virtual

Enables or disables dual-stream mode on the sender side.

Deprecated

v4.2.0. This method is deprecated. Use setDualStreamModeEx instead

You can call this method to enable or disable the dual-stream mode on the publisher side. Dual streams are a pairing of a high-quality video stream and a low-quality video stream:

• High-quality video stream: High bitrate, high resolution.
• Low-quality video stream: Low bitrate, low resolution. After you enable dual-stream mode, you can call setRemoteVideoStreamType to choose to receive either the high-quality video stream or the low-quality video stream on the subscriber side.

Note

This method is applicable to all types of streams from the sender, including but not limited to video streams collected from cameras, screen sharing streams, and custom-collected video streams.

Parameters

enabled	Whether to enable dual-stream mode: true: Enable dual-stream mode. false: (Default) Disable dual-stream mode.
streamConfig	The configuration of the low-quality video stream. See SimulcastStreamConfig.Note: When setting mode to DISABLE_SIMULCAST_STREAM, setting streamConfig will not take effect.
connection	The connection information. See RtcConnection.

Returns

• 0: Success.
• < 0: Failure.

setDualStreamModeEx()

virtual int agora::rtc::IRtcEngineEx::setDualStreamModeEx ( SIMULCAST_STREAM_MODE mode, const SimulcastStreamConfig & streamConfig, const RtcConnection & connection )

pure virtual

Sets the dual-stream mode on the sender side.

The SDK defaults to enabling low-quality video stream adaptive mode ( AUTO_SIMULCAST_STREAM ) on the sender side, which means the sender does not actively send low-quality video stream. The receiving end with the role of the host can initiate a low-quality video stream request by calling setRemoteVideoStreamTypeEx, and upon receiving the request, the sending end automatically starts sending low-quality stream.

• If you want to modify this behavior, you can call this method and set mode to DISABLE_SIMULCAST_STREAM (never send low-quality video streams) or ENABLE_SIMULCAST_STREAM (always send low-quality video streams).
• If you want to restore the default behavior after making changes, you can call this method again with mode set to AUTO_SIMULCAST_STREAM.

Note

The difference and connection between this method and enableDualStreamModeEx is as follows:

• When calling this method and setting mode to DISABLE_SIMULCAST_STREAM, it has the same effect as enableDualStreamModeEx (false).
• When calling this method and setting mode to ENABLE_SIMULCAST_STREAM, it has the same effect as enableDualStreamModeEx (true).
• Both methods can be called before and after joining a channel. If both methods are used, the settings in the method called later takes precedence.

Parameters

mode	The mode in which the video stream is sent. See SIMULCAST_STREAM_MODE.
streamConfig	The configuration of the low-quality video stream. See SimulcastStreamConfig.Note: When setting mode to DISABLE_SIMULCAST_STREAM, setting streamConfig will not take effect.
connection	The connection information. See RtcConnection.

Returns

• 0: Success.
• < 0: Failure.

setSimulcastConfigEx()

virtual int agora::rtc::IRtcEngineEx::setSimulcastConfigEx ( const SimulcastConfig & simulcastConfig, const RtcConnection & connection )

pure virtual

Sets the simulcast video stream configuration.

Since

v4.6.0

This method can be called in scenarios involving multiple channels. You can call the setSimulcastConfig method to set video streams with different resolutions for the same video source. The subscribers can call to select which stream layer to receive. The broadcaster can publish up to four layers of video streams: one main stream (highest resolution) and three additional streams of different quality levels. setRemoteVideoStreamType Applicable scenarios: This method can be called in scenarios involving multiple channels.

Parameters

simulcastConfig	This configuration includes seven layers, from STREAM_LAYER_1 to STREAM_LOW, with a maximum of three layers enabled simultaneously. See SimulcastConfig.
connection	Connection information. See RtcConnection.

Returns

• 0: Success.
• < 0: Failure.

setHighPriorityUserListEx()

virtual int agora::rtc::IRtcEngineEx::setHighPriorityUserListEx ( uid_t * uidList, int uidNum, STREAM_FALLBACK_OPTIONS option, const RtcConnection & connection )

pure virtual

Set the high priority user list and their fallback level in weak network condition.

Note

• This method can be called before and after joining a channel.
• If a subscriber is set to high priority, this stream only fallback to lower stream after all normal priority users fallback to their fallback level on weak network condition if needed.

Parameters

uidList	The high priority user list.
uidNum	The size of uidList.
option	The fallback level of high priority users.
connection	An output parameter which is used to control different connection instances.

Returns

int

• 0 : Success.
• <0 : Failure.

takeSnapshotEx() [1/2]

virtual int agora::rtc::IRtcEngineEx::takeSnapshotEx ( const RtcConnection & connection, uid_t uid, const char * filePath )

pure virtual

Takes a snapshot of a video stream using connection ID.

This method takes a snapshot of a video stream from the specified user, generates a JPG image, and saves it to the specified path. Call timing: Call this method after joinChannelEx. Related callbacks: After a successful call of this method, the SDK triggers the onSnapshotTaken callback to report whether the snapshot is successfully taken, as well as the details for that snapshot.

Note

• The method is asynchronous, and the SDK has not taken the snapshot when the method call returns.
• When used for local video snapshots, this method takes a snapshot for the video streams specified in ChannelMediaOptions.
• If the user's video has been preprocessed, for example, watermarked or beautified, the resulting snapshot includes the pre-processing effect.

Parameters

connection	The connection information. See RtcConnection.
uid	The user ID. Set uid as 0 if you want to take a snapshot of the local user's video.
filePath	The local path (including filename extensions) of the snapshot. For example: Windows: C:\Users\<user_name>\AppData\Local\Agora\<process_name>\example.jpg iOS: /App Sandbox/Library/Caches/example.jpg macOS: ～/Library/Logs/example.jpg Android: /storage/emulated/0/Android/data/<package name>/files/example.jpg Attention: Ensure that the path you specify exists and is writable.

Returns

• 0: Success.
• < 0: Failure.

takeSnapshotEx() [2/2]

virtual int agora::rtc::IRtcEngineEx::takeSnapshotEx ( const RtcConnection & connection, uid_t uid, const media::SnapshotConfig & config )

pure virtual

Gets a video screenshot of the specified observation point using the connection ID.

This method takes a snapshot of a video stream from the specified user, generates a JPG image, and saves it to the specified path. Call timing: Call this method after joinChannelEx. Related callbacks: After a successful call of this method, the SDK triggers the onSnapshotTaken callback to report whether the snapshot is successfully taken, as well as the details for that snapshot.

Note

• The method is asynchronous, and the SDK has not taken the snapshot when the method call returns.
• When used for local video snapshots, this method takes a snapshot for the video streams specified in ChannelMediaOptions.
• If the user's video has been preprocessed, for example, watermarked or beautified, the resulting snapshot includes the pre-processing effect.

Parameters

connection	The connection information. See RtcConnection.
uid	The user ID. Set uid as 0 if you want to take a snapshot of the local user's video.
config	The configuration of the snaptshot. See SnapshotConfig.

Returns

• 0: Success.
• < 0: Failure.

enableContentInspectEx()

virtual int agora::rtc::IRtcEngineEx::enableContentInspectEx ( bool enabled, const media::ContentInspectConfig & config, const RtcConnection & connection )

pure virtual

Enables or disables video screenshot and upload.

This method can take screenshots for multiple video streams and upload them. When video screenshot and upload function is enabled, the SDK takes screenshots and uploads videos sent by local users based on the type and frequency of the module you set in ContentInspectConfig. After video screenshot and upload, the Agora server sends the callback notification to your app server in HTTPS requests and sends all screenshots to the third-party cloud storage service. Call timing: This method can be called either before or after joining the channel.

Note

Before calling this method, ensure that you have contacted technical support to activate the video screenshot upload service.

Parameters

enabled	Whether to enalbe video screenshot and upload: true: Enables video screenshot and upload. false: Disables video screenshot and upload.
config	Screenshot and upload configuration. See ContentInspectConfig.
connection	The connection information. See RtcConnection.

Returns

• 0: Success.
• < 0: Failure.

startMediaRenderingTracingEx()

virtual int agora::rtc::IRtcEngineEx::startMediaRenderingTracingEx ( const RtcConnection & connection )

pure virtual

Enables tracing the video frame rendering process.

Since

v4.1.1

The SDK starts tracing the rendering status of the video frames in the channel from the moment this method is successfully called and reports information about the event through the onVideoRenderingTracingResult callback. Applicable scenarios: Agora recommends that you use this method in conjunction with the UI settings (such as buttons and sliders) in your app to improve the user experience. For example, call this method when the user clicks the Join Channel button, and then get the time spent during the video frame rendering process through the onVideoRenderingTracingResult callback, so as to optimize the indicators accordingly.

Note

• If you have not called this method, the SDK tracks the rendering events of the video frames from the moment you call joinChannel(const char* token, const char* channelId, uid_t uid, const ChannelMediaOptions& options) to join the channel. You can call this method at an appropriate time according to the actual application scenario to set the starting position for tracking video rendering events.
• After the local user leaves the current channel, the SDK automatically tracks the video rendering events from the moment you join a channel.

Parameters

connection

The connection information. See RtcConnection.

Returns

• 0: Success.
• < 0: Failure.

setParametersEx()

virtual int agora::rtc::IRtcEngineEx::setParametersEx ( const RtcConnection & connection, const char * parameters )

pure virtual

Provides the technical preview functionalities or special customizations by configuring the SDK with JSON options.

Since

v4.3.0

Parameters

connection	The connection information. See RtcConnection.
parameters	Pointer to the set parameters in a JSON string.

Returns

• 0: Success.
• < 0: Failure.

getCallIdEx()

virtual int agora::rtc::IRtcEngineEx::getCallIdEx ( agora::util::AString & callId, const RtcConnection & connection )

pure virtual

Gets the call ID with the connection ID.

When a user joins a channel on a client, a callId is generated to identify the call from the client. You can call this method to get callId, and pass it in when calling methods such as rate and complain. Call timing: Call this method after joining a channel.

Parameters

callId	Output parameter, the current call ID.
connection	The connection information. See RtcConnection.

sendAudioMetadataEx()

virtual int agora::rtc::IRtcEngineEx::sendAudioMetadataEx ( const RtcConnection & connection, const char * metadata, size_t length )

pure virtual

send audio metadata

Since

v4.3.1

Parameters

connection	The RtcConnection object.
metadata	The pointer of metadata
length	Size of metadata

Returns

• 0: success
• <0: failure @technical preview

preloadEffectEx()

virtual int agora::rtc::IRtcEngineEx::preloadEffectEx ( const RtcConnection & connection, int soundId, const char * filePath, int startPos = 0 )

pure virtual

Preloads a specified sound effect to a channel.

Since

v4.6.0

Each time you call this method, you can only preload one sound effect file into memory. If you need to preload multiple sound files, please call this method multiple times. After preloading is complete, you can call playEffect to play the preloaded sound effects, or call playAllEffects to play all preloaded sound effects. Applicable scenarios: This method can be called in scenarios involving multiple channels.

Note

• To ensure a smooth experience, the size of sound effect files should not exceed the limit.
• Agora recommends that you call this method before joining a channel.
• If preloadEffectEx is called before playEffectEx is executed, the file resource will not be closed after playEffectEx. The next time playEffectEx is executed, it will directly seek to play at the beginning.
• If preloadEffectEx is not called before playEffectEx is executed, the resource will be destroyed after playEffectEx. The next time playEffectEx is executed, it will try to reopen the file and play it from the beginning.

Parameters

connection	One RtcConnection object. See RtcConnection.
soundId	The audio effect ID.
filePath	The absolute path of the local file or the URL of the online file. Supported audio formats include: mp3, mp4, m4a, aac, 3gp, mkv and wav.
startPos	The playback position (ms) of the audio effect file.

Returns

• 0: Success.
• < 0: Failure.

playEffectEx()

virtual int agora::rtc::IRtcEngineEx::playEffectEx ( const RtcConnection & connection, int soundId, const char * filePath, int loopCount, double pitch, double pan, int gain, bool publish = false, int startPos = 0 )

pure virtual

Plays a specified sound effect in a channel.

Since

v4.6.0

You can call this method to play a specified sound effect to all users in the channel. Each call to this method can only play one sound effect. To play multiple sound effects simultaneously, please call this method multiple times. This method allows you to set whether to publish sound effects in a channel. In order to play multiple sound files simultaneously, simply call the method multiple times with different soundId and filePath parameters. Applicable scenarios: This method can be called in scenarios involving multiple channels.

Note

• Agora recommends not playing more than three sound effects at the same time.
• The sound effect ID and file path in this method must be consistent with those in the preloadEffectEx method.
• If preloadEffectEx is called before playEffectEx is executed, the file resource will not be closed after playEffectEx. The next time playEffectEx is executed, it will directly seek to play at the beginning.
• If preloadEffectEx is not called before playEffectEx is executed, the resource will be destroyed after playEffectEx. The next time playEffectEx is executed, it will try to reopen the file and play it from the beginning.

Parameters

connection	One RtcConnection object. See RtcConnection.
soundId	The audio effect ID.
filePath	The absolute path of the local file or the URL of the online file. Supported audio formats: mp3, mp4, m4a, aac, 3gp, mkv and wav.
loopCount	Number of times the sound effect to be looped: -1: Loop infinitely until calling stopEffect or stopAllEffects. 0: Play once. 1: Play twice.
pitch	The pitch of the audio effect. The range is from 0.5 to 2.0, with a default value of 1.0 (original pitch). The lower the value, the lower the pitch.
pan	The spatial position of the audio effect. The range of values is from -1.0 to 1.0: -1.0: The audio effect is heard on the left of the user. 0.0: The audio effect is heard in front of the user. 1.0: The audio effect is heard on the right of the user.
gain	The volume of the audio effect. The value range is from 0 to 100, with a default value of 100 (original volume). The smaller the value, the lower the volume.
publish	Whether to publish the audio effect in the channel: true: Publish the audio effect in the channel. false: (Default) Do not publish the audio effect in the channel.
startPos	The playback position (ms) of the audio effect file.

Returns

• 0: Success.
• < 0: Failure.